Use What You Have – Scrap Wood…

Last week, I was all on task to clean the garage. That was going to be my “project” of the week.

I got sidetracked.

fullsizeoutput_12b4

It all started with me gathering together a bunch of small scrap pieces of wood that were scattered around the garage – left over from the wood work during our renovation 6 months ago.

fullsizeoutput_12ae

I didn’t know what to do with all the small, seemingly unusable, pieces of cherry wood. I got mentally stuck on these scraps. What to do with the piles? I couldn’t move on until I decided what to do with the scrap wood. Or, maybe, I was looking for an excuse to procrastinate the garage cleaning task. I don’t know. All I know is that I didn’t want to just throw the wood away. On the other hand, I didn’t want to stack it up in the corner somewhere to be forgotten.  Eventually, I decided I needed to use it or loose it. I opted to use it. Also, I justified this side project in my mind – technically I was still cleaning up the garage by getting rid of the scrap wood? Anyway, the jigsaw came out and I started cutting. Two hours later I had cut 32 pieces of wood for an art project…

fullsizeoutput_12af

I hand sanded the sharp edges a bit. I liked the contrast of light and dark of the different pieces so I opted to maintain that. The already older, darker pieces of wood got a coat of oil. The light pieces of wood stayed naked – without oil. A spray finish was applied to everything. I, then, glued the pieces together to create flowers…

fullsizeoutput_12b0

I thought the flowers looked pretty good, but they didn’t feel quite finished…

fullsizeoutput_12b1

I remembered my fancy hardware experience from just 2 weeks earlier – The Secret Project. This project was going to be out in the open. It needed some fancy hardware, so off to the neighborhood hardware store I went.

Yep. Fancy hardware was the detail these flowers needed to feel finished…

fullsizeoutput_12b2

I will pair these posies up with a cow in a sunflower field print and call it an art installation – for work.

Cow in Sunflower Field...

Put your orders in now – we’ve probably got another hundred pieces to transform into something fun :)

A Return To All Its Old Glory – The Front Door…

Our front door is old and original to the house. We know this because our house is old, our neighbor’s house was built at the same time, and our neighbor has the same front door.

I had not planned any sort of restoration or redo on the door. I assumed it would stay as is. I didn’t even think of protecting it during our renovation. One of our contractor’s guys suggested that we remove the door during the project – to protect it from damage. That seemed like a good idea. They removed it and installed a slab construction door for the duration of the project. The old door was placed in the garage.

Front Door...

Tad and our contractor started to talk about getting a new front door. As I walked by the old door the first few days, I realized how sad and downtrodden it really was. I began to resign myself to the fact that, maybe, the old door was done for. As the days passed, I would stare at it for a few seconds as I walked by.  I was kind of bummed about giving up on the old thing. I thought about the guy that hand crafted it over 100 years ago. I appreciated the quality of the materials. I appreciated that it was over 100 hundred years old – and still technically doing it’s job. I thought about how we had just sort of taken all that for granted over the years. I started to really take in all the previously overlooked details. Suddenly, I decided the door needed to be saved for all eternity! I decided the door could and should be restored. Our contractor thought I was crazy – and declined to take it on. Tad was skeptical, but offered some suggestions. I didn’t want to give up on it. The poor thing had been through some rough times over the years, but the details were intact, and it was still beautiful – in my opinion.

fullsizeoutput_1151

I made this my project! I became slightly obsessed. Both Tad and our contractor put a time limit on my getting the door restored. They both stated that it couldn’t delay the project timeline. At the time, I kind of thought they put a deadline down hoping that I couldn’t get it done – so we would be forced to get a new door. That only made me more obsessed with getting it done. The old door was staying!

Here is the abbreviated story of the door – as I know it…

Some previous owner had dogs that scratched the wood and the window. A repair had been attempted at some point. That repair was, obviously, less than optimal.

fullsizeoutput_1152

We had a break in, at some point, where the inside panel was forced in. We repaired it by just nailing the center panel back in place.

fullsizeoutput_1153

We suspect that the hardware was replaced a number of times over the last century. We replaced it with an egg knob sometime during the last decade or two. As well, Tad had done a bowtie repair on the knob area.

fullsizeoutput_1155

Some of the veneer at the bottom was splintering off.

fullsizeoutput_114f

There was a piece of trim around the window that was missing.

fullsizeoutput_1154

Over the last few years, there seemed to be a lot of expansion and contraction of the door, making it somewhat difficult to close or open depending on the seasons and/or humidity in the air. Come to find out, upon closer inspection, it was coming apart at the seams…

fullsizeoutput_1150

The finish was flat and inadequate. The door was dull and stained in some places. Simply put, it was not pretty.

In need of door restoration...

I had my hands full. I knew I couldn’t do this on my own as it was way too extensive given it needed more than a little refinishing. I started the search for someone to restore the old door. I contacted 5 or 6 people. I either got no response or they didn’t want to take it on given the repairs that were needed. I was getting nervous. Tad, then, pulled out a name from his phone. It was a company that had done some old window restoration at his work. At first this company, too, wasn’t sure about taking on my project, but they agreed to at least come look at it. I was 2 weeks into my deadline at this point. I had to get this going!

Initially, I think the guy wasn’t sure I was serious about this restoration. Despite his reservations with me and/or the project, he seemed excited. I could tell that he had a passion for his craft. He showed me picture of old doors that they had restored. He told me about our door. He said that it was likely chestnut or mahogany – probably from a southeastern forest that was completely obliterated in the early 1900s due to logging for building materials. Fortunately, he said that there is recent work to re-establish the chestnut forest in our country.  This information made me want to save the door even more!

He pointed out that the details on the door were pressed into the wood rather than carved – and, of course, all done with hand tools rather than machines. Pretty amazing to think about the skill and hard work that went into this door a hundred years ago!

fullsizeoutput_117b

I practically begged the guy to take on the project. They kind of reluctantly agreed – stating that they would have to put their “best guy” on the project. In the end, I think the initial reluctance was because the majority of people wouldn’t spend the extra money or effort on a door that could be replaced for 25% of the restoration cost of this door. They didn’t realize they were dealing with a crazy person at the time. I desperately wanted to save something from the old house. I wanted to show that new isn’t always better than old (in people and things). Plus, I had to prove that I could win the deadline competition (yes, I viewed it as a competition at the time). Finally, I felt an obligation to save a little part of what used to be a forest that was eliminated back in the early 1900s :(

They would take the door completely apart, remove the past/failing repairs, replace the veneer as needed, replace the trim around the window, put it all back together, and finish it properly – all within 4-6 weeks.

They delivered as promised!

Before restoration…

fullsizeoutput_118a

After – completely restored and note how the details pop!

fullsizeoutput_1191

The other side – before restoration…

fullsizeoutput_118b

The other side – after restoration – beautiful, warm, rich, velvety, and well sealed!

fullsizeoutput_1190

This company employees true craftsmen. They took pride in their work. They treated this project like it was going into their own home! It was refreshing!

Updates were provided via text during the process. I loved that!

The veneer was replaced as needed.

fullsizeoutput_118e
fullsizeoutput_118d

The window trim was recreated and replaced.

fullsizeoutput_118c

I even got to stop by the shop and approve the stain color/finish – in the finishing room.

fullsizeoutput_118f

The place was huge with tons of amazing restoration going on with old beautiful windows and doors. It was encouraging to see how many other projects/people are restoring old stuff! It was totally fun!

Shortly following the field trip, the newly restored door was safely delivered back to our garage. It was successfully rebuilt, re-veneered, restored, redone, and refinished. It was re-energized! The deadline was met. It was ready for installation.

fullsizeoutput_115e

Then, the contractor decided the old door jamb needed to be completely rebuilt. I couldn’t argue with that. A new (custom) door jamb was ordered.

fullsizeoutput_1156

A few weeks later, the front door was in place! Some finish work was needed – a return visit for some fine tuning of door fit, some work to beef up the exterior trim so the security door could be rehung, filling of nail holes, firming up of the threshold with foam, caulking everywhere, paint on the exterior, and oil on the inside.

fullsizeoutput_1178

fullsizeoutput_1184

fullsizeoutput_1186

fullsizeoutput_1185

The door restoration guy also suggested that nicer door hardware would be icing on the cake (my words, not his). We considered the whole gamut of style and functional options. Basic knob and deadbolt versus all out ornate periodic specific handle set, and basic lock with separate deadbolt versus mortise locksets. We settled on a something in between. A simple design with a little bit of egg and dart detail that complements the egg and dart pressed wood detail on the door.

fullsizeoutput_1189

I am happy we took the door restoration guy’s suggestion. It definitely adds that little something. It completes the whole look and feel.  It highlights the details of the door even more!

Egg & Dart Door Hardware...

I love that the door is beautiful. I love that it should last at least another 100 years. Tad loves that it functions properly. It is strong, solid and straight. It opens and closes as it should. It stays in place when open (rather than drifting back to the closed position as it used to). The front door has been returned to all its old glory!

fullsizeoutput_1179

fullsizeoutput_1187

fullsizeoutput_117a

fullsizeoutput_117b

fullsizeoutput_1183

Totally worth it!

Lesson learned – old things (doors and people) are amazing!

Lighting – vintage and not…

We did a ton of recessed lights in all our rooms because we like light. We like to see without squinting. We are getting old. We need more light. We are happy with our recessed lighting. We have more light than we have ever had. We also have the ability to dim the recessed lighting as desired. Recessed lighting is very, very functional. We like recessed lighting. Though, recessed lighting definitely doesn’t do much for the decorative element in a space…

fullsizeoutput_1145

Initially, Tad was happy with just recessed lights in all areas except the dining room and for bedside lighting. I was happy with just recessed lights in all areas except the entry and hallway. We both agreed that bathroom vanity sconces were a necessity. I could go on for days about the bazillion discussions we had about lighting and light fixtures. I am guessing it would bore you to death. Heck, it bores me to death just thinking about it. I am going to do both of us a favor and just get to the exciting part.

We decided we were all in on the decorative lighting adventure!

Yippie ki yay!

Yes, we decided to get hardwired (rather than table lamps) decorative lighting for all the above mentioned areas – bathroom, bedside, dining room, entry, and hallway. This is a bit surprising for us. Neither of us gets overly excited about decorative lighting. So, it was definitely a new scene for us.

The new bathroom sconce decision was easy. We had chosen some sconces for our master bathroom a few years ago, but were unable to use them due to layout and space limitations. We looked around briefly to see what was new out there, but ended up still liking the old sconces. The sconces are simple and sleek. The lighting is great (LED for Tad – he is obsessed with LED). The finish is lovely in polished chrome. I like polished chrome in the bathroom. I have always liked polished chrome in the bathroom (and kitchen for that matter). I will always like polished chrome in the bathroom (and likely in the kitchen too). It’s my thing.

Bathroom Sconces...

The story is similar with our bedside lighting. While looking at lighting for another project several years ago, we saw these bedside lights. When the opportunity for bedside lighting came about with our current project, we were happy to see that these fixtures were still being made. Tad likes that they are LED (again, with the LED obsession) and very contemporary. I like that they are very minimal in size and appearance. We both like that they are easy to adjust, dim, and brighten.

Bedside Lighting...

fullsizeoutput_1141

The rest of the lighting story was a bit more circuitous. Our permit approval wasn’t dependent on the rest of the lighting, so there was no real deadline to get the decorative lighting decision done. What? No deadline? A lovely, relaxed, non-pressured process? I am not used to that!

However, despite the opportunity for procrastination (because there was no deadline), this whole decorative lighting thing came together pretty quickly. It was quite a surprise!

We had some informal criteria for our decorative light fixtures. Tad wanted simple and minimal. I wanted simple but unique. Tad wanted LED and contemporary. I wanted something inspired by the era of our house (1910s – 1920s), but not antique feeling or looking. I did some research. I found that some 1910-1920’s lighting was a bit industrial in style and feel. I like industrial, so I went with it.

Tad had previously chosen a dining room fixture that could be considered “contemporary industrial.” It met the requirements of simple, minimal, unique, and LED. The style didn’t quite meet the “inspired by the era of 1910-1920”, but I liked it. I was on board.

fullsizeoutput_1144To complement Tad’s chosen dining room fixture, I started the search for entry and hall light fixtures that were ”updated industrial”. I wanted the 1910-1920 inspired thing.

Tad liked the classic schoolhouse fixture.

fullsizeoutput_114b

While the schoolhouse style fixture met most of the criteria, I thought it was too simple, too basic, and not unique enough. After a couple of back and forth ideas, we settled on the idea of an “acorn” shaped fixture. An internet search for acorn lighting brought me to a company in Milwaukee. Immediately, I knew I had found my decorative lighting groove – amazingly cool vintage fixtures electrically reworked for current times with clear crystal glass shades of precisely cut prism type designs called holophanes.

fullsizeoutput_1147

Holophanes are a light fixture with a story, and I am a sucker for a good story – https://www.vintagebrasslight.com/Articles.asp?ID=236.

Tad ended up choosing the Ellipse rather than the Acorn for the hallway.

fullsizeoutput_1136

fullsizeoutput_1134

I chose the Edison for our entry.

fullsizeoutput_1135

fullsizeoutput_1132

I love these light fixtures!

fullsizeoutput_1133

  • Beautifully simple and minimal – no fussy scrolls, candles, or hanging crystals.
  • Definitely unique – you can’t find these babies at the chain/internet lighting sources.
  • Wired for incandescent bulbs, but compatible with LEDs.
  • Complements Tad’s chosen dining room fixture – these felt similar, cohesive, and lovely next to the sleek, simple dining fixture.
  • Inspired by the 1910-1920s designs – the holophanes are circa 1920 to 1950s – not quite the exact time period of our house, but pretty darn close!
  • Industrial – salvaged from amphitheaters, naval yards and other industrial buildings.

fullsizeoutput_1137

When it came time to order the dining room fixture, Tad wanted to see it in person before committing. We went on a field trip to a store that had one in stock. This is where the initial dining room decision went awry. The sizes and shapes were limited and none seemed quite right for our space. We, sadly, scrapped it.

Back to the drawing board :(

You are probably thinking “Uh Oh – but every other light fixture in the place was chosen based on the fact that it worked well with that dining room light!” You aren’t alone. I was thinking the same exact thing.

The clouds, then, parted. Across the store, I saw a better version of the scrapped light fixture – a little prettier, a little more sparkly, a lot more interesting. Perfection!

fullsizeoutput_113c

It keeps the view from the front of the house to the back of the house open and airy.

fullsizeoutput_111b

The style is contemporary with an industrial vibe with all the exposed “wiring.”

fullsizeoutput_1130

The little glass crystal cut bulb covers are the modern, mini version of the vintage holophane fixtures – making it vintage inspired (at least in my mind).

fullsizeoutput_1149

I was pretty excited about finding light fixtures that I love! I am still excited! I think Tad is probably less excited than I am about the whole lighting scene. Though, I do believe he is still quite surprised that it all came together in perfect harmony!

Pretty together...

I think next up will be the front door restoration. It kind of goes along with this whole updated vintage thing. It also sort of started my 2017 is “the year of using what you have.” Yes, last year was the year of just getting stuff done. This year will be a continuation of that by using what I already have to pull together, organize, decorate and enjoy my little spot on the planet.

Happy New Year!